- Wireless device software related sections
- From the phone
- Special thanks
- 227628 Posted on 2025-5-6 20:53
Top sticker card
Next, I was going to generate a .dts file, I needed to look for GPIO_LED information, and by analyzing the factory firmware, I found that the factory firmware did not seem to have the "LED configuration" option. Or maybe I'm not looking for the place. However, there is a configuration file in the original firmware, and I flipped through all the files containing "LED", and finally learned that the GPIO_LED configuration of the WIA3300-10 is as follows:The behavior of LED lights can be influenced by breeds.Published on 2024-12-30 16:31At present, breed is available, it is based on K2P modification, but it is not perfect, but it can be called up.My posts
Published on 2025-2-22 16:42
Sticky cardPosted on 2025-5-6 23:02
Enter the breed environment and command line telnet 192.168.1.1Published on 2025-5-6 20:53
Posted on 2025-5-6 23:02 Paparazzi cardsI'm an amateur garbage guy myself, my level is extremely poor, my skills are none, I'm older, and I can't speak clearly. It is inevitable that there will be mistakes in the article, and the bigwigs are asked to correct them. 1. Brief introduction: This batch of WIA3300-10 is a telecommunications ...
Published on 2025-5-6 23:00
I'm an amateur garbage guy myself, my level is extremely poor, my skills are none, I'm older, and I can't speak clearly. It is inevitable that there will be mistakes in the article, and the bigwigs are asked to correct them.Published on 2025-5-6 23:00QQ loginPublished on 2024-12-30 20:20
Enshan Wireless Forum (Changzhou Enshan Computer Development Co., Ltd. All rights reserved)
loginMobile versionoppose
At this time, I did not have the ability to verify the GPIO_LED in breed, so I could only verify it by repeatedly modifying, compiling, and flashing the firmware, but I didn't know that the "wia3300-10 breed" modified by K2P's breed had a big pitfall, which would cause the LED to behave as expected.Manifestation card
LandlordReply